The VW & Audi OBD2 Scan Tool is an easy to use, stand alone unit that will have you scanning your vehicle like a pro within minutes. Simply, plug it into the OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read colour display accompanied by a user friendly interface that requires no additional software.
This scanner will allow you to access ALL VW & Audi vehicles systems including:
- Body Systems
- Plus More
Special Features include:
- Oil Service Reset
- Steering Angle Reset
- Electric Parking Park Release
- Battery Management System
- DPF Regneration and Reset
- Throttle Position Sensor Reset and Adjust
- TMPS Reset and Relearn (Tyre Pressure Monitoring System)
- Fuel Injector Coding
You will be able to read/reset VW & Audi specific codes as well as read live data from vehicle systems. It is a must have for any Audi or VW owner as there are a number of tasks that you need to have a scan tool for. Like changing the battery or replacing the brake pads.
Special FUNCTIONS for VW & Audi include:
Oil/Service/Brake Service Reset Function
Reset the engine oil, Carry out the CBS Reset, Exhaust emission inspection, Coolant Service Reset, Spark plugs Reset, Brake fluid Service Reset, Micro-filter Service Reset
Battery Check and Registration
Register the battery replacement, this is a MUST DO JOB, failing to do so may create an over charging situation, shorten the battery life and/or enable limp-home mode
EPB Reset Function
Brake Pad / Shoe changes on vehicles equipped with EPB’s (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. This tool will offer you that capability on supported models. De-activate to Service Position – Replace – Re-activate.
SAS Reset Function
The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it’s stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.
If the Steering Angle Sensor (SAS) needs to be changed, many vehicle’s require the new sensor to be calibrated. This tool will allow you to carry out steering angle re-calibration on supported models.
Diagnose ABS/SRS system codes, read and clear DTCs and turn off ABS/SRS warning light, retrieves ABS/SRS ECU information, etc.
Throttle Position Sensor Reset
DPF Regeneration or Reset (Diesel Particulate Filter)
Note that these special features and functions may not be available on all models. Please get in touch with us first to ensure supportability.
Main Unit, OBD 16PIN Cable, User Manual, USB Cable, Protective Nylon Case.