Truck Tyre Pressure System Great TPMS setup for light trucks, motorhomes and caravans as it provides you with 6 external wheel sensors with live pressure and temperature monitoring. Easy to install the wheel sensors as they just screw onto the valve and replace your valve cap. The system turns off and on automatically as the sensors are activated by movement so when you hop in your vehicle they will turn on and 10 minutes after you stop they will turn off. You can also choose bar or PSI as your setting so you can choose the unit of measure that you prefer. Ensure you know what your pressures are doing!
Live Data: The truck tyre pressure monitoring system (TPMS) monitors tyre pressure/temperature status in real time, which will transmit data to the screen on your dash and has an alarm and flashing warning icon if there is a problem. You can set the high and low alarms pressures between 22PSI – 188PSI and you can set two upper and lower pressures so one for the front two sensors and one for the back two sensors. So for example if you have the low pressure alarm set at 30PSI when a tyre reaches this pressure the unit will beep and flash to warn you. Same goes for the high pressure alarm. In addition, there is also an alarm if the tyre increases or decreases in pressure to quickly so you will be warned of slow leaks etc.
Wide Application: This system is suitable for any vehicle with six tyres with the maximum pressure of the tyre being 188psi. You have a wide range to set your low and high pressure alarms and this is easy to do. Also you can set the temperature alarm so you will get a warning if it reaches this level. This can be great to warn your of bearing problems or other issues that cause increased temperature.
Long Range: Long wireless range up to 25m so no problem if you need to use them on a longer vehicle or on your wheels of your caravan or trailer you are towing. With this range you can be confident that you will get accurate readings to the display on your dash. So thats 25m from your dash to your wheels covering most 6 wheel setups.
Digital display: LCD screen that sticks to your dash comes with a sticking pad so you can choose where you want to put your system so that it is easy to read. Bright backlight and easy to read numbers allows you to see the status of your tyres easily during the day and night and it displays all 6 tyres on one screen.. Also being solar powered means there is no cables to fuss with.
Power supply: Solar charging so you can just stick it and forget it. Has a built in battery so if you do not see any sun for a few days that is not a problem. Also, it turns off when there has been no movement from the wheels so no problem when stored in garage or under cover.
External sensors: Which are easy to install, have a two year battery life and are weather proof. Built to last and be accurate with accuracy +/- .15psi. After two years if the battery does go flat they are easy to replace and just take common CR1632 batteries. *Batteries may or may not last up to two years on some units (depending on use and battery condition). Batteries not covered by the product warranty.
Display Unit: 15cm x 5cm x 2.5cm
Wheel Sensors: 40 Grams
Do they do temperature readings?
Yes the sensors read both the truck tyre pressure and temperature in your tyres. This is then displayed on the LCD. It is very interesting to see the relation between temperature and tyre pressure. This can also help you detect problems early if there is a higher temperature in one tyre.
Will the tyre sensors last?
Yes we have tried and tested these units to make sure that they last with what Australia can dish at them! Dust, Salt Water, Water, Sand, Corrugations, Dust, Corrugations, Dust…
Is the picture set to a truck?
Yes at the moment it is so it shows the cab front with two tyres and then the others are at the back.