OBDSTAR X300 DP Plus (X300 PAD2) Key Programmer – C Package Full Configuration
X300 DP Plus C Full Configuration Diagnostic Function:
- Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. Diagnosis functions include: Read DTCS, Clear DTCS, Read data stream, Special functions etc.
- Classify special function: ABS, EEPROM Adapter, Battery match, CVT learning, EPB, Gear learning, Immobiliser, TPMS (low tire) reset, Cluster calibrate, ECU programming, steering angle reset.
- Specially designed for Android platform with clear and user-friendly interface.
X300 DP Plus C Full Configuration Software Advantages:
1: ECU Clone
ECU Clone, means ECU duplication.
The device copies all the data from the original vehicle ECU, and then writes all data copied into ECU with the same hardware to realise the same ECU function with the original vehicle.
2.Clone directly when replacing a new or a used ECU!
Without online matching in the 4S store or removal of ECU bonding wire for reading and writing! Directly write without dismantling OBD!
3.Three features for ECU Clone:
A. Free of 4S online: Break the monopoly from 4S, benefiting automobile maintenance industry
B. Simplified operation procedures: realise foolproof operation
C. Non-dismantling with zero risks: read and write data without dismantling ECU
Switch activation function
(Today many instruments or audio of vehicles activate secondary power supply to go into power-on status by relevant module CAN communication on the vehicle, but sometimes an instrument or an audio is separated from vehicle CAN BUS network, causing startup failure when it needs to be repaired by an auto technician. This function can simulate CAN communication to activate secondary power supply, so the instrument or the audio enters into power-on status. In this way, it not only can test and verify the instrument or the audio, but also save an enormous cost for an auto technician to purchase a large number of startup platforms of various vehicles and wiring harnesses!)
Add “Help”functions:
1. Contain built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc.
2. Car list: directly get it on the device
3. Upgrade Announcement: all details are available on the device
4. Customers can look up the features or uniquely support functions on the device
5. Help notes: built-in help notes for each model or function
8. Wiring diagrams: built-in ECU wiring diagrams, more intuitionistic and convenient
2. Car list: directly get it on the device
3. Upgrade Announcement: all details are available on the device
4. Customers can look up the features or uniquely support functions on the device
5. Help notes: built-in help notes for each model or function
8. Wiring diagrams: built-in ECU wiring diagrams, more intuitionistic and convenient
OBDSTAR X300 DP Plus C Full Configuration Hardware Advantages:
1. Built-in VCI box, communication more stable
2. 8-inch touchscreen
3. Can be charged directly via OBD interface
4. Practical and high-end case
2. 8-inch touchscreen
3. Can be charged directly via OBD interface
4. Practical and high-end case
5. Industrial design with silicone case
6. Back bracket design: Can prop on the steering wheel or stand on the table, easier to operate
7. With simulated key 1 applies to the vehicle with 94/D4 type of smart key.
8. 3 in 1 P001 programmer: combined with EEPROM adapter + RFID adapter+ Key Renew adapter
9. Add the clip of reading SOP 8PIN EEPROM
10. Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)
11.Maintenance Database
12.Remote Assistant
13.One Key Upgrade
6. Back bracket design: Can prop on the steering wheel or stand on the table, easier to operate
7. With simulated key 1 applies to the vehicle with 94/D4 type of smart key.
8. 3 in 1 P001 programmer: combined with EEPROM adapter + RFID adapter+ Key Renew adapter
9. Add the clip of reading SOP 8PIN EEPROM
10. Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)
11.Maintenance Database
12.Remote Assistant
13.One Key Upgrade
How to use OBDSTAR X300 DP Plus Induction Coil?
1. Functional Overview:
Induction Coil is used to detect the key induction coil failure of the vehicle.
2.Application Method:
Attach the Induction Coil to the key induction coil, and insert the key or turn ignition on, while Induction Coil red indicator lights up and goes out, indicating the key induction coil is good;the indicator does not illuminate to indicate the key coil is damaged, please check and repair or replace.
OBDSTAR X300 DP Plus Full Configuration Technical Parameters
● Operation system: Android 5.1.1
● CPU: Exynos4418 Dual Core ARM Cortex A9 1.4GHz
● Battery: 3700mA, rechargeable polymer lithium battery
● Extension memory card: 32G Micro SD (TF) card supported
● Memory capacity:1GB
● Storage capacity: 32GB
● LCD: 8.0 inch
● LCD resolution: 1280*800
● Touch screen: Capacitive touch screen
● Camera: 5 mega rear view camera
● Wi-Fi: supported
● Working temperature: -10℃ ~ 55℃（14℉ ~ 131℉ ）
● Storage temperature: -20℃ ~ 70℃（-4℉ ~ 158℉ ）
● Weight: about 1.0 Kg
● Dimension: 254mm*174*mm*35mm
● CPU: Exynos4418 Dual Core ARM Cortex A9 1.4GHz
● Battery: 3700mA, rechargeable polymer lithium battery
● Extension memory card: 32G Micro SD (TF) card supported
● Memory capacity:1GB
● Storage capacity: 32GB
● LCD: 8.0 inch
● LCD resolution: 1280*800
● Touch screen: Capacitive touch screen
● Camera: 5 mega rear view camera
● Wi-Fi: supported
● Working temperature: -10℃ ~ 55℃（14℉ ~ 131℉ ）
● Storage temperature: -20℃ ~ 70℃（-4℉ ~ 158℉ ）
● Weight: about 1.0 Kg
● Dimension: 254mm*174*mm*35mm
Packing List:
Reviews
There are no reviews yet