Work on your Mercedes like a professional with this full system scan tool*. Must have for any Mercedes owner! Allowing you to scan most systems* on your Mercedes for faults, check and clear these faults, run service procedures just like the dealer can*.
It has an easy to read colour screen and a simple to use interface so it is easy for anyone to use. Will also work on other brands of cars for a basic OBD2 engine scan to check and clear engine faults and read data*.
The Mercedes OBD2 Scan Tool is an easy to use, stand alone unit that will have you scanning your vehicle like a pro within minutes. Simply, plug it into the OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read colour display accompanied by a user friendly interface that requires no additional software. If you are a Mercedes owner then this is a must have tool to keep under the seat or in the glove box.
Access most Mercedes Vehicles Modules Including:
- Body Systems
- Plus More*
Special Features* Include:
- ETC Reset*
- Oil Reset*
- EPB replace brake pads*
- Adjustment steering-angle sensor*
- Tire pressure warning light reset (without tire pressure display)*
- Tire pressure learning (with tire pressure display)*
- Battery registration*
- Transmission adaptation*
- Transmission self-learning*
- DPF regeneration*
- DPF matching*
- Reset learned values for adBlue(R) metering*
- ABD bleeding*
- Reset fuel pump*
You will be able to read/reset Mercedes specific codes as well as read live data from vehicle systems. It is a must have for any Mercedes owner as there are a number of tasks that you need to have a scan tool for.
Oil, Service, Brake Service Reset Function*
Reset the engine oil, Carry out the CBS Reset, Exhaust emission inspection, Coolant Service Reset, Spark plugs Reset, Brake fluid Service Reset, Micro-filter Service Reset
Battery Check and Registration*
Register the battery replacement, this is a MUST DO JOB, failing to do so may create an over charging situation, shorten the battery life and/or enable limp-home mode
EPB Reset Function*
Brake Pad / Shoe changes on vehicles equipped with EPB’s (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. This tool will offer you that capability on supported models. De-activate to Service Position – Replace – Re-activate.
SAS Reset Function*
The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it’s stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.
If the Steering Angle Sensor (SAS) needs to be changed, many vehicle’s require the new sensor to be calibrated. This tool will allow you to carry out steering angle re-calibration on supported models.
Diagnose ABS/SRS system codes, read and clear DTCs and turn off ABS/SRS warning light, retrieves ABS/SRS ECU information, etc.
Throttle Position Sensor Reset*
DPF Regeneration or Reset (Diesel Particulate Filter)*
Note that a forced/manual DPF regen using this scanner is only possible on vehicles that allow this function. Some vehicles do not allow a forced/manual DPF regen using third-party tools as the process will need to be done manually on the vehicle via user inputs.
TPMS Reset *
Injector Coding *
*NOTICE: PRODUCT LIMITATIONS
DPF Regeneration or Reset (Diesel Particulate Filter) – Note that a forced/manual DPF regen using this scanner is only possible on vehicles that allow this function. Some vehicles do not allow a forced/manual DPF regen using third-party tools as the process will need to be done manually on the vehicle via user inputs. In this case the scanner will only provide instructions on how to do the process manually via user inputs on the vehicle, and will not have the capability to automate the process. This is not indicative of a ‘faulty’ scanner and any return reason with such will be subject to our Returns Policy and Terms & Conditions.
Special Functions – Note that these special features and functions may not be available on all models. Please get in touch with us first to ensure supportability. We will need your model, motor and VIN and the function you are after to determine if compatible. Returns due to a buyer’s failure to first confirm with OBD2 Australia compatibility on this vehicle will be subject to our Returns Policy and Terms and Conditions.
Software Updates – A special and or a standard software update is and may be required to enable some features and functions. The software update is available in Windows only. It is the responsibility of the buyer to execute and apply the software updates. A return with a reason ‘the device was not updated’ will be subject to our Return Policy and Terms and Conditions as this does not constitute a ‘faulty’ or ‘defective’ device. Video and photo proof is required for any claim of this product as not working. The video proof must clearly show and demonstrate the claim.
Feedback File – in cases where the scanner fails to perform a certain function, OBD2 Australia will require a feedback file to be sent for analysis. Feedback files are required in order to determine the cause of incompatibility, and in order to enable the failed function. If a customer refuses to update and or send feedback files, and forces a return for a refund, the refund will be subject to restocking fees.
This scanner only works on Mercedes vehicles with the 16pin OBD2 port only. It does NOT work with vehicles that have the 16pin port along with the 38pin round port, even with an adapter. It is imperative that you check your ports fist prior to purchase of this device.
By purchasing this item, the buyer confirms to have fully understood and read the product limitations.