KTM Diagnostic OBD cable
Important (Please Read): Pin out is designed for the older International / Kehin style connector pin out (with K-line communication protocol)
Also note this will require a OTG cable for using the Android app.
Some light reading how users use this: https://advrider.com/f/threads/ktm-690-efi-2008-2013-idiots-guide.931664/
These are the following bikes:
PLEASE BE ADVISED THAT THIS WILL NOT WORK WITH 2012+ MODELS AND OR BIKES WITH “FLY BY WIRE THROTTLE”. SOME BIKES MAY HAVE A DIFFERENT PIN OR OBD PORT LAYOUT. CHECK YOUR PORT FIRST BEFORE BUYING THIS SET. RETURNS DUE TO INCOMPATIBILITY (WITHOUT OR AGAINST OUR ADVISE) WILL BE SUBJECT TO OUR TERMS AND CONDITIONS.
WARNING: This is not a toy and if doing tuning of bike you can cause damage
NOTICE: Note that OBD2 Australia will not be held liable for any damage this cable and software may cause to your computer or your vehicle. As you are dealing with third-party, free, outdated and unsupported software, support will only be provided for the hardware (the cable). Installation and usage of this free software is at your own risk. We do not provide activation keys for it as well. No software support will be provided. If the software you acquired does not connect to your vehicle, chances are you have the incorrect or incompatible version, which is NOT indicative of a faulty cable per se. You may need to research first to find out which software version will work for your vehicle. You must also take into account the model year, chassis and the market where your vehicle is released in.