Holden OBD2 Scan Tool Full System


  • Stand-Alone Unit – Plug & Play
  • Retrieve most Fault Codes & Clear Check Lights*
  • Works with most Holden vehicles
  • Special Functions* for Holden – ABS Bleeding, BMS, DPF etc*
  • Clear & Reset Service Reminders*
  • Easy To Read Colour Screen
  • Professional Level Scan Tool
  • Rugged Design Good For The Workshop
  • Latest Software – Lifetime Free Updates
  • Easy To Use
  • 12 Month Warranty
  • Australian Support
IMPORTANT: See product limitations below BEFORE purchase.
(2 customer reviews)

In stock

OBD2 Scanz FST360 Holden handheld OBD2 scan tool will allow you to access most of the functions and diagnose problems on your Holden like a professional. Allowing you to access engine, transmission, ABS and all other systems for faults*.

With special features* such as Oil Light Service reset, ABS Bleeding, battery management reset & registration, DPF Regeneration, SAS etc*. It is a must have tool for any Holden owner with the technology these newer cars have and if you are doing any work on them yourself or drive a-lot of KMs.

With an easy to read colour screen and simple to use interface it is easy for anyone to use. Without a tool like this you cannot do your own maintenance as you cannot release brakes, prime fuel system etc. Will also work on other brands of cars for a basic OBD2 engine scan to check and clear faults and read data*.

The Holden OBD2 Scan Tool is an easy to use, stand alone unit that will have you scanning your vehicle like a pro within minutes. Simply, plug it into the OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read colour display accompanied by a user friendly interface that requires no additional software. If you are a Holden owner then this is a must have tool to keep under the seat or in the glove box. Without a tool like this you cannot reset all service lights, change a battery, release brakes for brake change and much more*.

This scanner will allow you to access most Holden vehicles modules systems including:

  • Engine*
  • Transmission*
  • ABS/DSC*
  • Airbags*
  • Body Systems*
  • Radio*
  • Plus More*

Special Features* include:

  • ETC reset*
  • Oil reset*
  • Battery registration*
  • ABS special function*
  • Adjustment steering-angle sensor*
  • Reset fuel pump*
  • Transmission self-learning*
  • Tyre pressure reset (TPMS)*
  • DPF regeneration*
  • EGR reset*

You will be able to read/reset Holden specific codes as well as read live data from vehicle systems. It is a must have for any Holden owner as there are a number of tasks that you need to have a scan tool for. Like changing the battery or replacing the brake pads.*

Special FUNCTIONS* for Holden include:

Oil, Service, Brake Service Reset Function

Reset the engine oil, Carry out the CBS Reset, Exhaust emission inspection, Coolant Service Reset, Spark plugs Reset, Brake fluid Service Reset, Micro-filter Service Reset

Battery Check and Registration

Register the battery replacement, this is a MUST DO JOB, failing to do so may create an over charging situation, shorten the battery life and/or enable limp-home mode

EPB Reset Function

Brake Pad / Shoe changes on vehicles equipped with EPB’s (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. This tool will offer you that capability on supported models. De-activate to Service Position – Replace – Re-activate.

SAS Reset Function

The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it’s stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.

If the Steering Angle Sensor (SAS) needs to be changed, many vehicle’s require the new sensor to be calibrated. This tool will allow you to carry out steering angle re-calibration on supported models.


Diagnose ABS/SRS system codes, read and clear DTCs and turn off ABS/SRS warning light, retrieves ABS/SRS ECU information, etc.

Throttle Position Sensor Reset 

DPF Regeneration or Reset (Diesel Particulate Filter) – note that a forced/manual DPF regen using this scanner is only possible on vehicles that allow this function. Some vehicles do not allow a forced/manual DPF regen using third-party tools as the process will need to be done manually on the vehicle via user inputs.

TPMS Reset 

Injector Coding 

Note that these special features and functions may not be available on all models. Please get in touch with us first to ensure supportability.

Kit Includes:

  • Main Unit
  • OBD 16PIN Cable
  • User Manual
  • USB Cable (For Software Updates)
  • Protective Case

Software Updates:

Software Update Guide: HERE


*Some features may not be available on some models and makes. Please get in touch with us first to ensure compatibility when in doubt. A special software update is and may be required to enable some features and functions. The software update is available in Windows only. It is the responsibility of the buyer to execute and apply the software updates.  A return with a reason ‘the device was not updated’ will be subject to our Return Policy and Terms and Conditions as this does not constitute a ‘faulty’ or ‘defective’ device. Video and photo proof is required for any claim of this product as not working. The video proof must clearly show and demonstrate the claim. 

Returns and refunds due to incompatibility (without or against OBD2 Australia advise, or refusal to execute troubleshooting/provide the required proof) will be subject to our Returns Policy/Terms. By purchasing this item the buyer confirms to have fully understood and read the product limitation.

We will need your VIN and the function you are after to determine if compatible. Returns due to a buyer’s failure to first confirm with OBD2 Australia compatibility on this vehicle will be subject to our Returns Policy and Terms and Conditions.

2 reviews for Holden OBD2 Scan Tool Full System

1-2 of 2 reviews
  1. Seems to be a great unit. Cleared oil light after oil change as I needed & probably does everything else it says it does, but the instruction manual with it is pretty woeful. Assumes a lot of knowledge and needs much more detail. Instructions on the OBD website spot on however. You must update the unit software before using. Happy with the purchase.

  2. The product performed as detailed in the description.
    The unit is relatively easy to operate and has a good display panel.
    Would be an added advantage if it would display a graph of items while the vehicle is running and in motion

Add a review
Currently, we are not accepting new reviews

Questions & Answers