Ford Ranger OBD2 Scan Tool – Full System Scanner and powerful vehicle fault diagnostic tool for Ford Ranger owners, small garages, repair workshop and mechanics by delivering OE-level diagnosis on all the electronic systems of Ford vehicles. It supports almost all Ford vehicles from 1996+ with standard OBD2 plug for Diesel & Petrol.
Ford Ranger handheld OBD2 scan tool will allow you to access all the functions and diagnose problems on your Ranger like a professional. Allowing you to access engine, transmission, ABS and all other systems for faults.
With special features such as Oil Light Service reset, EPB Release, Battery Management Reset & Registration, DPF Regeneration, SAS etc. It is a must have tool for any Ford owner with the technology these newer cars have and if you are doing any work on them yourself or drive a-lot of KMs.
With an easy to read colour screen and simple to use interface it is easy for anyone to use. Without a tool like this you cannot do your own maintenance as you cannot release brakes, reset battery system etc. Will also work on other brands of cars for a basic OBD2 engine scan to check and clear faults and read data.
The Ford Ranger OBD2 Scan Tool is an easy to use, stand alone unit that will have you scanning your vehicle like a pro within minutes. Simply, plug it into your Fords OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read colour display accompanied by a user friendly interface that requires no additional software. If you are a Ranger owner then this is a must have tool to keep under the seat, in the tool box or in the glove box. Without a tool like this you cannot reset all service lights, change a battery, release brakes for brake change and much more.
This scanner will allow you to access ALL Ford vehicles modules systems including:
- Body Systems
- Plus More
Special Features include:
- Oil Service Reset
- Electric Parking Park Release for replacing brake pads
- Battery Management System for replacing battery
- DPF Regneration and Reset
- Throttle Position Sensor Reset and Adjust
- TMPS Reset and Relearn (Tyre Pressure Monitoring System)
- Reset Straight Ahead Angle Adaption
- Reset PCM/TCM Kam
You will be able to read/reset Ford specific codes as well as read live data from vehicle systems. It is a must have for any Ford owner as there are a number of tasks that you need to have a scan tool for. Like replacing the brake pads.
Special FUNCTIONS for Ford Ranger Scan Tool include:
Reset Oil Change Indicator
Reset the engine oil change indicator once you have serviced the vehicle.
Battery Check and Registration
Register the battery replacement, this is a MUST DO JOB, failing to do so may create an over charging situation, shorten the battery life and/or enable limp-home mode
EPB Reset Function
Brake Pad / Shoe changes on vehicles equipped with EPB’s (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. This tool will offer you that capability on supported models. De-activate to Service Position – Replace – Re-activate.
SAS Reset Function
The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it’s stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.
If the Steering Angle Sensor (SAS) needs to be changed, many vehicle’s require the new sensor to be calibrated. This tool will allow you to carry out steering angle re-calibration on supported models.
Diagnose ABS/SRS system codes, read and clear DTCs and turn off ABS/SRS warning light, retrieves ABS/SRS ECU information, etc.
Throttle Position Sensor Reset
DPF Regeneration or Reset (Diesel Particulate Filter)
Note that these special features and functions may not be available on all models. Please get in touch with us first to ensure supportability.