Ford Scan Tool – Full System OBD2 Scanner

$240.00

  • Stand-Alone Unit – Plug & Play
  • Retrieve All Fault Codes & Clear Check Lights
  • Works with most Fords from 1995+*
  • Special Functions for Fords  – ABS Bleeding, BMS, DPF etc*
  • Clear & Reset Service Reminders*
  • Easy To Read Colour Screen
  • Professional Level Scan Tool
  • Rugged Design Good For The Workshop
  • Latest Software – Lifetime Free Updates
  • Easy To Use
  • 12 Month Warranty
  • Australian Support

IMPORTANT: See product limitations below BEFORE purchase.

(21 customer reviews)

In stock

Ford OBD2 Scan Tool – Full System Scanner and powerful vehicle fault diagnostic tool for Ford owners, small garages, repair workshop and mechanics by delivering OE-level diagnosis on all the electronic systems of Ford vehicles. It supports almost all Ford vehicles from 1996+ with standard OBD2 plug for Diesel & Petrol.

Ford Scan Tool handheld OBD2 scan tool will allow you to access all the functions and diagnose problems on your Ford like a professional. Allowing you to access engine, transmission, ABS and all other systems for faults.

With special features* such as Oil Light Service reset, EPB Release, Battery Management Reset & Registration, DPF Regeneration, SAS etc*. It is a must have tool for any Ford owner with the technology these newer cars have and if you are doing any work on them yourself or drive a-lot of KMs.

With an easy to read colour screen and simple to use interface it is easy for anyone to use. Without a tool like this you cannot do your own maintenance as you cannot release brakes, reset battery system etc. Will also work on other brands of cars for a basic OBD2 engine scan to check and clear faults and read data.

The Ford OBD2 Scan Tool is an easy to use, stand alone unit that will have you scanning your vehicle like a pro within minutes. Simply, plug it into your Fords OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read colour display accompanied by a user friendly interface that requires no additional software. If you are a Ford owner then this is a must have tool to keep under the seat, in the tool box or in the glove box. Without a tool like this you cannot reset all service lights, change a battery, release brakes for brake change and much more.

This scanner will allow you to access MOST* Ford vehicles modules systems including:

  • Engine
  • Transmission
  • ABS/DSC
  • Airbags
  • Body Systems
  • Radio
  • Plus More

Ford Scan Tool Special Features* include:

  • Oil Service Reset*
  • Electric Parking Park Release for replacing brake pads*
  • Battery Management System for replacing battery*
  • DPF Regeneration and Reset*
  • Throttle Position Sensor Reset and Adjust*
  • TMPS Reset and Relearn (Tyre Pressure Monitoring System)*
  • Reset Straight Ahead Angle Adaption*
  • Reset PCM/TCM Kam*

You will be able to read/reset Ford specific codes as well as read live data from vehicle systems. It is a must have for any Ford owner as there are a number of tasks that you need to have a scan tool for. Like changing the battery or replacing the brake pads.

Special FUNCTIONS* for Ford include:

Reset Oil Change Indicator*

Reset the engine oil change indicator once you have serviced the vehicle.

Please note that on some FORD vehicles, the procedure to reset the oil change indicator is manually done, even if you have a full system scanner such as this one. The scanner will only show you instructions on how to do it manually and will not be able to do it automatically as again, the procedure is manual. This does NOT indicate a ‘faulty’ scanner, or a ‘not as described’ technicality as this is the ONLY WAY to reset the oil service/change indicator on your vehicle.

Battery Check and Registration*

Register the battery replacement, this is a MUST DO JOB, failing to do so may create an over charging situation, shorten the battery life and/or enable limp-home mode

EPB Reset Function*

Brake Pad / Shoe changes on vehicles equipped with EPB’s (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. This tool will offer you that capability on supported models. De-activate to Service Position – Replace – Re-activate.

SAS Reset Function*

The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it’s stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.

If the Steering Angle Sensor (SAS) needs to be changed, many vehicle’s require the new sensor to be calibrated. This tool will allow you to carry out steering angle re-calibration on supported models.

ABS/AIRBAG*:

Diagnose ABS/SRS system codes, read and clear DTCs and turn off ABS/SRS warning light, retrieves ABS/SRS ECU information, etc.

Throttle Position Sensor Reset *

DPF Regeneration or Reset (Diesel Particulate Filter) *

TPMS Reset*

Note that these special features and functions may not be available on all models. Please get in touch with us first to ensure supportability.

NOTICE: PRODUCT LIMITATIONS – Read Before Purchase

*Some features may not be available on some models and makes. Please get in touch with us first to ensure compatibility when in doubt. A special software update is and may be required to enable some features and functions. The software update is available in Windows only. It is the responsiblity of the buyer to execute and apply the software updates.  A return with a reason ‘the device was not updated’ will be subject to our Return Policy and Terms and Conditions as this does not constitute a ‘faulty’ or ‘defective’ device.  Video and photo proof is required for any claim of this product as not working. The video proof must clearly show and demonstrate the claim. Returns and refunds due to incompatibility (without or against OBD2 Australia advise, or refusal to execute troubleshooting/provide the required proof) will be subject to our Returns Policy/Terms.

*Some features may not be accessible due to security restrictions on your vehicle. This is not indicative of a ‘faulty scanner’ as these restrictions were put on by either the dealer or manufacturer of your vehicle. As such, returns and refunds for this reason will be subject to our Returns Policy as stated on our Terms & Conditions. OBD2 Australia is not privy to what these restrictions are, as it varies per model and year of vehicle, as well as the dealership it came from. This is something that is beyond our control, and as such not a case of ‘Not as described’ or ‘Unfit for purpose’ as every buyer is informed of this limitation prior to purchase. 

Video Series

OBD2 Scanz on Ford Ranger

Updating Software Instruction Video

Manual & Updates

Latest Software: v2.00 Click Here
Software Update Guide: Click Here
(Also see video above)
Manual: Click Here
Download Full Coverage List (PDF)
Download Full Coverage List (XLS)

21 reviews for Ford Scan Tool – Full System OBD2 Scanner

1-5 of 21 reviews
  1. Very Happy With Item 👍👍

  2. Very happy with the producy. Easy to use and a most useful tool in identifying problems.

  3. It’s good does what is required can be updated for future models

  4. Works great. Fixed all codes in my Ranger including the electrical faults which most OBD2 scanners don’t

  5. Exactly as advertised and ordered fast delivery

Add a review
Currently, we are not accepting new reviews

Questions & Answers

    Will the Ford scanner cover a 2011 Ford Ranger for Fuel Injector Coding?
  1. 0 votes
    Q Will the Ford scanner cover a 2011 Ford Ranger for Fuel Injector Coding?
    Asked by Anonymous user on July 11, 2023 2:42 pm
    A

    Hey mate! It may cover your vehicle for that function. Cheers!

  2. Can you confirm coverage for a 2014 Ford Ranger for the Ford scanner? VIN *************9297. Just want to reset the BCM.
  3. 0 votes
    Q Can you confirm coverage for a 2014 Ford Ranger for the Ford scanner? VIN *************9297. Just...... Read more
    Asked by Anonymous user on July 5, 2023 3:21 pm
    A

    Hiya! Yes it can reset the BCM for that vehicle.

  4. Will Ford scanner cover 2015 Ford Ranger for BCM reset. VIN ************3322
  5. 0 votes
    Q Will Ford scanner cover 2015 Ford Ranger for BCM reset. VIN ************3322
    Asked by Anonymous user on July 5, 2023 3:19 pm
    A

    Hey mate, yes it would cover it for that function.