Great TPMS setup for your 4WD or car when you have only 4 tyre’s that need live pressure monitoring. Easy to install and the system turns off and on automatically as the sensors are activated by movement. You can also choose bar or PSI as your setting so you can choose the unit of measure that you prefer. Can also be used on your caravan or trailer as can handle distance of up to 25m from dash to axle.
The tyre pressure monitoring system (TPMS) monitors tyre pressure/temperature status in real time, which will transmit data to the screen on your dash/windscreen and has an alarm and flashing warning icon if there is a problem. You can set the high and low alarms pressures between 7PSI – 50PSI. So for example if you have the low pressure alarm set at 30PSI when a tyre reaches this pressure the unit will beep and flash to warn you. Same goes for the high pressure alarm. In addition, there is also a alarm if the tyre increases or decreases in pressure too quickly so you will be warned of slow leaks etc.
This system is suitable for any vehicle with four tyres with the maximum pressure of 55psi. You have a wide range to set your low and high pressure alarms and this is easy to do. Also you can set the temperature alarm so you will get a warning if it reaches this level. Temperature can be handy as this can link to other issues such as bearing issues etc.
Long wireless range up to 25m so no problem if you need to use them on a longer vehicle or on your wheels of your caravan or trailer you are towing. With this range you can be confident that you will get accurate readings to the display on your dash.
LCD screen that sticks to you windscreen, comes with a quality sticking pad so you can choose where you want to put your system. Attaching to the window screen allows you to be able to easily see the display and keeps clutter off your dash. Bright backlight and easy to read numbers allows you to see the status of your tyres easily.
Solar charging so you can just stick it and forget it. Has a built in battery so if you do not see any sun for a few days that is not a problem. Also, it turns off when there has been no movement from the wheels so no problem when stored in garage or under cover.
External Wheel sensors
Which are easy to install, have a two year battery life and are weather proof. Built to last and be accurate with accuracy +/- .15psi. After two years if the battery does go flat it is easier to replace and just takes a common CR1632 battery.
Display Size: 92mm x 87mm x 50mm
Wheel Sensor Size & Weight: 21mm x 17mm – 9grams
I need 8 sensors can I use two of these units?
Yes you can use two of these units together so this will give your 8 tyre readings. So you can have one for the tow vehicle and one for whatever you are towing. Or you can look at one of our larger units.
Do they do temperature readings?
Yes the sensors read both the pressure and temperature in your tyres. This is then displayed on the LCD. It is very interesting to see the relation between temperature and tyre pressure. This can also help you detect problems early if there is a higher temperature in one tyre.
Will the tyre sensors last?
Yes we have tried and tested these units to make sure that they last with what Australia can dish at them! Dust, Salt Water, Water, Sand, Corrugations, Dust, Corrugations, Dust…
Does this come with batteries and can I get spare batteries and spares?
Yes the tyre sensors all come with batteries installed. And for replacement batteries they take a common CR type battery that you can buy from supermarkets etc. Also yes we do sell spare wheel sensors and parts if needed. Spare sensors are here.
“Fantastic and easy to install. Have put two units in my Ranger one for the ute and one for van.”
“Great to have and allows me to ensure I have the correct pressure in my tyres to ensure I get the best out of them.”
“Interesting to see the pressure when on the sand and how much it goes up. I let them down to 10psi which is really 11psi and then after some driving they are up to 13-14psi.”
Pairing wheel sensors – Can help calibrate pressure and temp readings, Also if you need to replace a sensor.
Setting Alarms – This is when you will get a warning for low or high pressure readings. Also the high temperature alarm.
Changing Sensor Batteries – How to replace the batteries in the wheel sensors. They are just common CR batteries.