Digital Boost Gauge – Need to see your boost on your petrol or diesel car. This will show live readings straight from your OBD2 port on your car. Giving you an easy to read boost gauge that can be installed in minutes.
Speedometer & Tachometer – Need to see your speed and revs in a easier to read format right there on your dash. Live straight from your cars ECU.
Other Gauges – A number of other gauges you can display with live digital feeds right from your cars ECU. Quickly change the display of these with a push of a button.
Scan Tool – Check and Clear any engine faults. Find out why your engine check light is on with a definition and code and then clear the code once fixed.
Alarms – Set alarms for a number of different data feeds. These are: Speed, RPM, Voltage and Water Temp. This mean that when you car goes over these values a Beep Beep alarm will sound great for setting a speed alarm or keeping a eye on coolant temp.
Auto On/Off – This tool will automatically turn on as soon as you start your car and will turn off a few minutes after you turn the car off.
Easy to Install – Plugs into your cars OBD2 port which you will find under your steering wheel above your pedals. Takes under 10 mins to install. Just plug in cable and tuck flat cable into trim so it is out of site and mount the suction mount on your windscreen.
Will this fit my car?
This will work with any car that is OBD2 so normally these are cars that are 2008 and newer in Australia. Some times it will work with older cars but you can check list here.
How do I install this?
This is very easy to install and can be done in under 10 minutes. You just plug the cable into the OBD2 port of your car which you can find under the steering wheel or above the pedals. It may be behind a plastic flap that you can pull off. Then tuck the flat cable out of the way. Stick the suction mount of your windscreen and you are good to go.
Can I see boost and revs on the gauge?
Yes you can see a number of gauges like this and you can check what they are above.