Alfa & Fiat OBD2 MultiECUScan Adaptor Cable Set

Cable length: 22cm

Note: There are only used as a connector cables and does not contain any software or diagnostic cables. You will need either one of our tools below to complete this kit and have a scan tool system. 

IMPORTANT: To check what cables you need for your vehicle, head to this site HERE. 

Bluetooth Tool Here
ELM 327 Cable Tool Here
KKL Cable Here

Note that not all functions and features may be possible while using these cables and scan tools, or access to certain modules may not be possible. It is important that research is done prior to purchasing these adapters, to confirm which ones are needed and are compatible. Returns to due to incompatibility will be subject to our Returns Policy and Terms and Conditions.

Then you will also need the MultiECUscan software or app which you can check out HERE. You can also check compatibility HERE.

There are 4 adaptor cables included which perform different functions.

Green Cable :  ABS / Power Steering adapter lead ( “Adapter 1” on MultiECUScan website)

-Designed to allow access to the ABS and Power Steering systems on supported vehicles. This adapter has a green connector on one end for easy identification.

Using this adapter, Pin 7 on the diagnostic tool is connected to Pins 1,7,9 & 12 on the car.

Red Cable:  Airbag adapter lead ( “Adapter 2” on MultiECUScan website)

-Designed to allow access to the Airbag system on supported vehicles.

This adapter has a red connector on one end for easy identification.

Using this adapter, Pin 7 on the diagnostic tool is connected to pin 3 only pn the car.

Yellow Cable: CAN adapter lead ( “Adapter 3” on MultiECUScan website)

-Designed to allow access to the low-speed CAN system on supported vehicles.

This adapter has a yellow connector on one end for easy identification.

Using this adapter, Pin 6 & 14 on the diagnostic tool are connected to pins 1 & 9

Respectively on the car, Pin 7 on the diagnostic tool is connected to pin 12 on the car.

Purple Cable: Electric hood adapter lead ( “Adapter 4” on MultiECUScan website)

-Designed to allow access to the electric hood system on supported vehicles.

This adapter has a purple connector on the end for easy identification.

Using this adapter, Pin 7 on the diagnostic tool is connected to pins 7,8,11 & 13 one the car.