How to reset the service oil life/change light that has come up on the dash of your Grand Cherokee.

This light is to tell you that your car is due for a service and would normally be reset after the service has been done. However, if you are servicing the car yourself then you will need to reset this oil change light yourself

This is how you reset the oil life on your Grand Cherokee

Step 1: Hop into the car and do not touch the brake pedal. Press the start button twice. The engine should not start and it will show ‘RUN’

Step 2: Press the accelerator pedal to the floor 3 time within 5 seconds. So, it is a quick three pumps.

Step 3: Press the start button again to turn off. Now you can start the engine normally and the light should be reset.

Your service reminder oil change light has now been reset and you are good to go. Most cars have a way of manually resetting the service reminder like this. So, you do not need any special tools for this. But if you do want to see your cars faults codes and build customs dashboards with live readings then you should get one of our OBD-AUS OBD2 scan tools.